 |
-
Rotary Actuators (Series 018075, 018050, 0180375)
- PHD Miniature
Rotary Actuators are lightweight, compact units for small part
orientation or part turn over. Adjustable stops provide 0° to 180°
rotation for pneumatic use. Also available in 3 Position and Air/Oil
Tandem versions.
Advantages: Available in two sizes, zero backlash at ends of
rotation for precise positioning.
|
 |
 |
-
Rotary Actuators (Series 1000-8000)
- Series
1000-8000 Rotary Actuators are a rugged line for pneumatic or
hydraulic service. These units have a wide range of rotations,
options, and shaft configurations allowing them to be configured for
most rotary applications. Standard rotations range up to 450° with
torques to 31,800 in-lb.
Advantages: Four bore sizes available in single and double rack
models, wide range of options available.
|
|
|
 |
-
Rotary Actuators (Series 2000-8000 Air/Oil)
- Air/Oil Tandem
Rotary Actuators provide the smooth control of hydraulics with the
simplicity of pneumatics. One end of the actuator is a closed loop
hydraulic control member. The other provides pneumatic power to the
racks.
Advantages: Four sizes available in both 2 and 3 position
models, standard built-in flow controls.
|
|
|
 |
-
Rotary Actuators (Series 2000-8000
Multi-Position)
- Multi-Position
Rotary Actuators can yield three, four, or five rotary shaft stop
positions. Each position is located by means of positive internal
stops.
Advantages: Four bore sizes available, wide range of options
available, output torque up to 15,900 in-lb [1797 Nm].
|
|
|
 |
-
Rotary Actuators (Series RA)
- PHD Series RA
Rotary actuators have zero backlash at ends of rotation providing
precise rotary positioning. Large shafts, bearings, and rack provide
high load-stopping capacity, exceptional radial and axial bearing load
ratings, and long unit life. Built-in optional shock absorbers provide
smooth deceleration of external loads.
Advantages: Available in five sizes, six standard rotations,
mounting patterns on three surfaces provide flexibility in design and
unit mounting.
|
|
|
 |
-
Rotary Actuators (Series RF)
- The Series RF
Rotary Actuator is available in 14, 20, and 25mm bore sizes with
standard rotation of 180 degrees and torque ranging from 7 to 67 in-lb
at 100 psi. All units feature built-in standard angle adjustments and
are infinitely adjustable from 0-180 degrees of rotation providing
superb flexibility and control. PHD’s internal urethane shock pads
provide quiet operation and end of rotation deceleration with precise
repeatability. The Series RF Rotary Actuator operates with zero
backlash at the end of rotations for precise rotary positioning.
|
|
|
-
- PHD RIxH
|
-
Rotary Actuators (Series RI)
- Series RI and
Series RIxH Rotary Actuators offer standard 2-day delivery. Series RI
Rotary Actuators incorporate internal air passages within the rotary
pinion to allow pneumatic coupling to other devices without external
tubing. Series RIxH Rotary Actuators incorporate a hollow pinion to
provide protection and routing for electrical cables and air lines.
Advantages: Available in three sizes, six torque ranges,
imperial or metric units.
|
-
- PHD RI
|
|
|
 |
-
Rotary Actuators (Series RL)
- PHD Series RL
Rotary Actuators cover a wide range of sizes from miniature 12 mm bore
units to 63 mm bore units. These actuators have a very high torque to
envelope ratio and are capable of very high rotation velocities.
Built-in optional shock absorbers provide smooth deceleration of
external loads.
Advantages: Available in eight sizes, six standard rotations,
built-in optional shock absorbers provide smooth deceleration of
external loads.
|
|
|
|
Other PHD Products:
To receive Information, Training or a Product Demonstration.
© Fluidtrols Corporation. 2004
|
